Why a metre uphill is not a metre on the flat: terrain difficulty in Planet Go

Published 13 November 2026 · Category Science · Česká verze

On flat city ground, a metre is a metre: you take a step and move forward by your step length. On a mountain trail, a steep descent or high in the mountains, the same metre on the map costs more effort — and therefore more steps, if steps are what move your avatar along a trek.

Since version 22, Planet Go can take that into account. Terrain difficulty can be turned on or off. The numbers come from measurements of the energy cost of walking, from terrain coefficients, and from how maximal oxygen uptake falls with altitude. This is not medical advice or a training plan, only a game conversion based on published models. If you have a health condition, feel unwell at altitude or are returning to exercise after illness, talk to a clinician.

Uphill is harder — and a very steep downhill can be too

In 2002, Alberto E. Minetti, Christian Moia, Giulio S. Roi, Davide Susta and Guido Ferretti measured, in the Journal of Applied Physiology, the energy cost of walking (and running) on gradients of about −45% to +45%, in joules per kilogram per metre. On the flat it is 2.5 J·kg⁻¹·m⁻¹. At a +10% slope their polynomial gives about 4.9, almost twice as much (about 1.96×).

A gentle descent is actually cheaper than the flat — the minimum is around −10%. We do not turn that into a discount: a metre in town stays a metre, and the multiplier never falls below 1. Only when the descent costs more than level walking do we add a penalty. At −45% that is about 1.44×. Picking your way down a very steep slope is not a rest: your legs are braking, and your joints are working.

The surface is not free either

Even on the flat, it matters what you walk on. In 1972, also in the Journal of Applied Physiology, Ralph G. Soule and Ralph F. Goldman derived terrain coefficients for predicting energy cost. Five years later Kent B. Pandolf, B. Givoni and R. F. Goldman used them in a still widely cited equation for walking with a load. Typical η values from this work are roughly: paved or blacktop 1.0, a dirt road around 1.1, a packed trail around 1.2, heavier brush around 1.5, swamp around 1.8 and loose sand around 2.1. Planet Go reads OpenStreetMap tags when they are there (path type, surface, alpine sac_scale). If the surface is unknown, it stays at 1.0 — we will not invent scree for a street in Prague.

Higher up, there is less oxygen

As altitude increases, air pressure falls, and with it the oxygen the body can use at maximal effort (VO₂max). In 2006, Jon Peter Wehrlin and Jostein Hallén measured endurance athletes between 300 and 2,800 m in the European Journal of Applied Physiology. VO₂max declined linearly by 6.3% per 1,000 m (in their sample, 4.6–7.5%). The study starts from 300 m; we use the same rate, but apply it only above 1,500 m, as a practical hiking threshold. At the summit of Mount Everest (8,848 m), altitude alone would be about 1.86×. Add a steep climb and rough alpine ground and the figure would go higher still, so we cap it at 12×.

How that becomes a number in the app

For each stretch we take the gradient from a digital elevation model (over at least 25 m, so tile noise does not invent false hills), the surface and the altitude. The multiplier is the product of these three ratios versus level walking, clamped between 1 and 12. The profile is computed once and cached. The trek bar then shows the current multiplier (for example “1× · flat”) and the steps remaining to the finish with the feature and without it.

SituationMultiplier in Planet Go
Flat city ground, low altitude1×
+10% ascent (from Minetti)about 1.96×
−10% descent1× (no discount)
Very steep descent, −45%about 1.44×
Everest summit altitude alone (8,848 m)about 1.86×
Steep climb, alpine terrain and Everest altitudeup to 12× (the cap)
Prague: Old Town Square → Prague Castle trekabout 3,900 steps to the finish with the feature, about 2,800 without it

The last row is from the catalogue trek (about 2.3 km), after roughly 200 m already walked. The route really does climb — about 60 m in the elevation model. The Castle sits higher than Old Town Square, and the conversion simply shows that in steps.

How to turn it on

Open the Planet Go app, go to Settings and switch on Terrain difficulty. The choice is remembered. Toggling it does not move your avatar or take away remaining energy: it only changes how quickly further steps become progress, and the estimate to the finish. The site operator can turn the feature on or off for everyone, and can lock the player switch. When the switch is available, the choice is yours — you might leave it off in town and turn it on for Sněžka or the Alps.

Again, this is a game model based on published equations, not a measurement of your metabolism, and not medical advice. Real effort still depends on fitness, pace, your pack, the weather and how you feel on the day.

Sources

  1. Minetti AE, Moia C, Roi GS, Susta D, Ferretti G. Energy cost of walking and running at extreme uphill and downhill slopes. J Appl Physiol. 2002;93(3):1039–1046. doi:10.1152/japplphysiol.01177.2001
  2. Soule RG, Goldman RF. Terrain coefficients for energy cost prediction. J Appl Physiol. 1972;32(5):706–708. doi:10.1152/jappl.1972.32.5.706
  3. Pandolf KB, Givoni B, Goldman RF. Predicting energy expenditure with loads while standing or walking very slowly. J Appl Physiol. 1977;43(4):577–581. doi:10.1152/jappl.1977.43.4.577
  4. Wehrlin JP, Hallén J. Linear decrease in VO₂max and performance with increasing altitude in endurance athletes. Eur J Appl Physiol. 2006;96(4):404–412. doi:10.1007/s00421-005-0081-9